FERONIX / INDUSTRIAL SURFACE SOLUTIONS
FERONIX
MARKLINE
Thermoplastic Floor & Line Marking Paint
High Scratch, Abrasion, Wear & Chemical Resistant Floor Marking Paint.
Fast Drying — 10 Min Touch Dry
High Abrasion & Wear Resistant
Excellent Chemical Resistance
UV & Weather Resistant
Strong Adhesion
Single Component, Ready to Use
WHY CHOOSE FERONIX MARKLINE?
High Scratch Resistance
Resists scratches from regular traffic and equipment movement.
Excellent Abrasion Resistance
Designed for heavy traffic including forklifts, vehicles and machinery.
Chemical Resistant
Resists water, oil, soap water, acids & industrial chemicals.
Water Resistant
Hydrophobic surface repels water for longer durability.
UV & Weather Resistant
Excellent outdoor durability with colour stability and long life.
Strong Adhesion
100% cross-hatch adhesion on concrete, RCC, bitumen & kerb.
Single Component, Ready to Use
No mixing ratio, no pot life, no mixing error. Just stir and apply.
Application Process
1
Prepare Surface
Surface must be clean, dry, free from dust, oil, grease & loose materials.
2
Stir Well
Shake or stir FERONIX MARKLINE paint thoroughly before use.
3
Thinner If Required
Use FERONIX recommended thinner (5-10% by volume) as per requirement.
4
Apply
Apply using brush, roller, air spray or airless spray.
5
Drying
Touch dry in 10 minutes. Hard dry in 12 hours (air dry conditions).
6
Second Coat
Apply second coat after 6 hours for better results.
7
Ready to Use
Strong, durable & high visibility floor marking ready.
Where Can You Use MARKLINE?
Factories
Warehouses
Parking Areas
Workshops
Garages
Walkways
Forklift Lanes
Safety Zones
Key Performance
10 MIN
Touch Dry
50-60 µm
DFT Per Coat
60%
Total Solids
2000+ g
Scratch & Wear Resistance
100%
Adhesion (Cross-Hatch)
Excellent
UV & Weather Resistance
Suitable Surfaces
Colour Options
Yellow
Green
White
Black
Technical Specifications
Product TypeThermoplastic Floor & Line Marking Paint
ChemistrySilicone-Modified Acrylic + Ceramic Pigment
ComponentsSingle Component
FormReady to Use
ColoursYellow, Green, White & Black
Solid Content60% Total Solid
Viscosity @ 27°C95 ± 5 seconds
DFT50 - 60 µm (Single Coat)
Touch DryApprox. 10 minutes
Hard DryApprox. 12 hours
FinishVery Hard, Glossy & Smooth
Gloss Level70+ @ 30°
Water ResistantExcellent (Hydrophobic)
Chemical ResistantExcellent (Diluted Acid, Alkali & Soap Water)
Adhesion100% Cross-Hatch as per IS-101 & ASTM D3359
FlexibilityPasses 0T Bend Test
Scratch & Wear Resistant2000 gms or more
Direct Impact Resistance10 Kg-cm
UV & Weather ResistanceExcellent
FlammabilityFlammable
ThinnerFERONIX Recommended Thinner
Thinner IntakeApprox. 5 - 10% by volume
Application MethodsBrush, Roller, Air Spray, Airless Spray
Recommended Coats2 Coats for better results
Recoat IntervalApprox. 6 hours
PrimerNot Required
Shelf Life12 Months
Pack Sizes10 L / 20 L
FREQUENTLY ASKED QUESTIONS
MARKLINE is a thermoplastic floor and line marking paint used to create clear, durable, high-visibility markings on factory floors, warehouses, walkways and parking areas.
MARKLINE is touch dry in approximately 10 minutes and hard dry in about 12 hours.
It is suitable for RCC, concrete, bitumen and kerb / stone surfaces.
Yes, MARKLINE has high scratch, abrasion and wear resistance suitable for forklift lanes and vehicle traffic.
No, a separate primer is not required for MARKLINE on properly prepared surfaces.
MARKLINE is available in Yellow, Green, White and Black.
Two coats are recommended for better durability and visibility, with a recoat interval of about 6 hours.
Yes, MARKLINE can be applied by brush, roller, air spray or airless spray.
CLEAR MARKING. SAFER FLOORS. BETTER ORGANIZATION.
FERONIX MARKLINE helps you create high visibility markings that last longer and perform in the toughest conditions.