FERONIX / INDUSTRIAL SURFACE SOLUTIONS
FERONIX
CORROX
Premium Anti-Corrosive DTM Paint
Advanced Protection Against Corrosion, Chemicals, Salt Water & Harsh Weather.
Anti-Corrosion Protection
Acid & Alkali Fume Resistant
Salt Water Resistant
UV & Weather Resistant
Direct To Metal
Single Component
Long Lasting Protection
WHY CHOOSE FERONIX CORROX?
Anti-Corrosive Protection
Helps protect metal surfaces from rust and corrosion.
Acid & Alkali Fume Resistant
Designed to withstand strong acid and alkali fume environments.
Salt Water Resistant
Protects in marine and salt water exposed environments.
Moisture Resistant
Excellent resistance to water, moisture and humidity.
UV & Weather Resistant
Withstands UV rays and harsh weather conditions.
Direct To Metal (DTM)
Self-priming coating. No separate primer required.
Single Component
Ready to use. No mixing ratio, no pot life.
Long Lasting Durability
Reduces maintenance and extends life of structures.
Simple 5-Step Application Process
1
Clean Surface
Remove dust, oil, grease, loose rust, scale and other contaminants.
2
Stir Well
Stir FERONIX CORROX thoroughly before use for uniform consistency.
3
Apply First Coat
Apply uniform coat using brush, roller, air or airless spray.
4
Apply Second Coat
Apply second coat after 6-12 hours for better protection.
5
Allow To Cure
Allow 24 hours curing before exposing to full service conditions.
Wide Range of Industrial Applications
Industrial Structures
Pipelines
Storage Tanks
Machinery
Beams & Channels
Pipe Racks
Cranes
Pumps & Valves
Gratings
Cooling Towers
ETP Structures
Marine Structures
Chemical Plants
Bridges & Railings
Fabricated Items
Recommended System for Heavily Rusted Surfaces
Heavy Rust
1. RUSTCON
Rust Converter
Strong Bond
2. CORROX
Anti-Corrosive DTM Paint
Long-Term Protection
Key Performance
200°C
Dry Heat Resistance
500+
Hours Salt Spray Reference*
100-120
µm DFT (2 Coats)
10 MIN
Touch Dry
6 HRS
Hard Dry
24 HRS
Full Cure
7-8
m²/L Coverage Per Coat
100%
DTM Application
Suitable for Ferrous & Non-Ferrous Metals
Technical Specifications
Product TypeAnti-Corrosive DTM Paint
TechnologySilicone-Modified Polyurethane (Si-PU) DTM
ComponentsSingle Component
ApplicationDirect To Metal (DTM)
ColourAll Colours Available (As Per RAL Shades)
Viscosity @ 27°C90 ± 5 seconds
DFT Per Coat50 - 60 µm (100-120 in 2 coats)
Touch DryApprox. 10 minutes
Hard DryApprox. 6 hours
Full CureApprox. 24 hours
FinishTough, Glossy & Smooth (60+ @ 60°)
Dry Heat ResistanceExcellent, up to 200°C
Salt Spray (ASTM B117)Passes, 500+ hours (2 coats)
Acid ResistanceExcellent (No flaking, 30% HCl / 48 hrs)
Water / UV ResistanceExcellent
*As per reference test conditions.
Application Methods
Brush
Roller
Air Spray
Airless Spray
Packing & Storage
Pack Sizes500 ml / 1 Litre / 20 Litres
StorageCool, Dry Place Away From Direct Sunlight & Heat
FlammabilityFlammable
FREQUENTLY ASKED QUESTIONS
FERONIX CORROX is a premium Silicone-Modified Polyurethane (Si-PU) Direct-to-Metal anti-corrosive protective paint that combines primer and topcoat in a single coating system.
No, CORROX is a self-priming Direct-to-Metal (DTM) coating designed for direct application on properly prepared steel and iron substrates.
CORROX offers excellent dry heat resistance up to 200°C without compromising adhesion or colour retention.
Yes, CORROX is designed to resist salt water, chemical fumes and harsh weather, making it suitable for marine and coastal applications.
Two coats are recommended for optimal film thickness and protection, with a recoat interval of approximately 6-12 hours.
FERONIX CORROX is available in 500 ml, 1 Litre and 20 Litre packs.
STRONG PROTECTION. LONGER LIFE.
FERONIX CORROX — Premium Anti-Corrosive DTM Paint for Tough Environments.